North Star M1577541F What to Do, What to Check, When To Check, Maintenance Mode, Maintenance Schedule

Maintenance

Maintenance Mode

Before performing any maintenance on the pressure washer, it must be placed in maintenance mode.

1.) Turn off engine.

2.) Turn off water supply.

3.) Squeeze trigger to relieve system pressure.

4.) Unplug spark plug wire from spark plug, (see engine owners’ manual).

Maintenance Schedule

What to Check	When To Check		What to Do
Inlet Filter	Each Use	Visually inspect and clean inlet filter with clear water.
		Visually inspect pressure hose and hose couplings. Replace
Pressure Hose	Each Use	hose if any of the following is evident:
		hose coupling is damaged, wire mesh is exposed or
		damaged, hose is permanently kinked or flattened, outer
		hose cover is blistered or loose.
Bolts	Each Use	Tighten any loose bolts.
Engine Oil	See engine manual	See engine manual for oil change instructions
Pump Oil	After 1st 50hrs,	Change pump oil. See pump oil change instructions.
	then 3mo/500hr	(On page 19)

18