Northern Industrial Tools 143384 owner manual Removing SDS-plus tool

Fitting and changing tools (Fig.2)

The device is equipped with a SDS-plus attachment system.

• clean tools and grease with a thin layer of machine grease before fitting.

• Pull back fastening sleeve (A, Fig.2) and hold.

• Push and rotate the dust-free tool into the tool holder as far as it will go. The tool will lock automatically.

• Check that it has locked by pulling the tool.

Removing SDS-plus tool (Fig.3)

Pull back fastening sleeve (A), hold and remove the tool.

Starting work (Fig.1)

Switching ON/OFF

• switching on: Press the operating switch (3).

• switching off: Press the operating switch (3) briefly and let go.

5