Maintenance and Storage
16
Maintenance Mode
Before performing any maintenance on the pressure washer, it must be placed in maintenance mode.
1.) Turn off motor and unplug cord.
2.) Turn off water supply.
3.) Squeeze trigger to relieve system pressure.
Maintenance Schedule
What to Check When To Check What to Do
Inlet Filter Each Use Visually inspect and clean inlet filter with clear water.
Pressure Hose
Each Use Visually inspect pressure hose and hose couplings. Replace
hose if any of the following is evident:
hose coupling is damaged, wire mesh is exposed or
damaged, hose is permanently kinked or flattened, outer
hose cover is blistered or loose.
Bolts Each Use Tighten any loose bolts.
Pump Oil After 1st 50hrs,
then 3mo/500hr Change pump oil. See pump oil change instructions on next
page.