Assembly of Wheels
1.Insert Axle Rod (F) into Base Support (I).
2.Put on #5 Flat Washer. Slide Wheel (G) into Axle Rod (F) and add a second #5 Flat Washer.
3.Use the end of Wrench (H2) with small notch to hold the Axle Rod notch in place. While holding Axle Rod (F) in place, tighten the #6 Nut Cap with Wrench (H1).
4.Add #5 Flat Washer, second Wheel (G), another #5 Flat Washer, and #6 Nut Cap to the other side of the Axle Rod (F), following the directions above.
ENGLISH
(F)
(#5)Axle
FlatRod Washer
(#6) |
|
| |
Nut |
| (I) | |
Cap |
| ||
(G) | Base | ||
| |||
| Wheel | Support |
8
