ENGLISH
Assembly of Base Support
1.Push Handle (E) attaches onto the Concession Stand
(C) using all of the supplied #1 Screws.
2.Insert Cross Bar (J) into the square inserts on the inside of Base Support (I) and secure from below with two #2 Bolts and two #4 Flat Washers. Insert the Leg Assembly (K) over the protruding ends of the Base Support (I) and fasten four #3 Bolts and four #4 Flat Washers and four #5 Nut Caps.
3.Assemble Base Support (I) into the bottom of the Concession Stand
(C) and secure with four #2 Bolts and four #4 Flat Washers.
7
