Assembly of Wheels
1.Insert Axle Bolt (F) into Base Support (I).
2.Put on #5 Flat Washer. Slide Wheel (G) into Axle Bolt (F) and add a second #4 Flat Washer.
3.Use Wrench (H) to tighten the #5 Nut Cup.
4.Add #4 Flat Washer, second Wheel (G), another #4 Flat Washer, and #5 Nut Cap to the other side of the Axle Bolt (F), following the directions above.
5.Use Wrench (H) to tighten the #5 Nut Cap.
(#4) | (F) |
Flat | |
Washer | Axle |
| Bolt |
(#5)
Nut Cap
(G)
Wheel
(I)
Base
Support
Assembly of Main Unit
1.Place Main Unit (A) onto the top of the Concession Stand (C).
2.Ensure that the two inserting pins at the bottom of the Main Unit (A) line up correctly so that Main Unit (A) can be locked under the beam of the Concession Stand (C).
ENGLISH
8
