7
7.Remove the aluminum cylinder from the plastic auger cage and lift off the cap on the aluminum cylinder. (You may need to use the cap opener located on the back of the unit under the motor.)
8.Now parts are all ready to wash in warm soapy water, towel dry.
USING YOUR HOME SLUSHEASE MACHINE™
1.Fill aluminum ice cylinder with small or broken pieces of ice. Be sure to fill both sides of the aluminum cylinder equally. Do not fill past Fill Line. NEVER attempt to remove the divider in the cylinder.
NOTE: For best results use crushed ice or small pieces of ice.
2.Add 7 tablespoons (4 oz) of table salt. Add 2 to 4 teaspoons (20 ml) of room temperature water. (THIS IS VERY IMPORTANT TO THE FREEZING OF BEVERAGES).
3.Place the lid back on the aluminum canister. (Make sure the lid is on tight and secure). See A below.
4.Place aluminum cylinder into the auger cage so that the lid of the aluminum canister is facing toward the top of lid as shown in picture B below.
5.Place cage lid on cage, making sure the teeth are aligned properly to lock into place. You may need to turn it so that the teeth align properly.
A
B
6.Place assembled cylinder cage into the blue mixing chamber. (Make sure to align grooves and notches for the cage to fit correctly into the blue mixing chamber.)
8
7.You may need to rotate the cylinder cage slightly to enable the cylinder cage to drop down into the mixing chamber.
8.Push both front and back end plugs into cylinder cage, to lock into mixing chamber.
Front End Plug
Illustration A | Illustration B |
9.After positioning the blue mixing chamber onto motor base (see Illustration A) you may need to rotate the cylinder cage while pushing the mixing chamber back toward the motor, so they lock in to place and are fitted correctly (see Illustration B).
10.Once the unit is together, lock the mixing chamber into the unit.
Levers Unlocked | Levers Locked |
11. Place lid back onto mixing chamber, make sure, lid is locked at the spout end with tabs and at the motor end with lid clip. UNIT WILL NOT OPERATE WITH THE LID OFF, AS
A SAFETY SHUT OFF.
