ENGLISH 3
INSTRUCTIONS FOR USE (Continued)
The RETRO POPCORN MAKER™ is easy to use. Just fol low these simple instructions.
After Taking the Unit Out of the Box
Your RETRO POPCORN MAKER™ is a lready fully assembled. Before first use,
lift the top housing off of the main body and wipe clean th e inside of the unit with a
non-abrasive moist sponge or a non-abrasive moist towel. Wipe dry with a non-
abrasive towel.
After cleaning the inside, put the top housing back onto the base.
Now you are ready to enjoy freshly popped popcorn i n your RETRO POPCORN MAKER™!
Popping Popcorn
First, find a stable place near an electrical outlet befor e starting. (Make sure your cord is
away from any water source. If needed, it is acceptable to use an extension cord).
1. Fill the kernel c ap on the top of the unit with your favorite popcorn. It is
IMPORTANT - NEVER underfill or overfill the kernel cap. Un derfilling the cap can
cause less kernels to pop and more hard kernels to come o ut of the unit during
popping. Overfilling can cause popped popcorn to burn an d smoke as it will overfill
the popping chamber. (If you overfill the cap with kernels w hen filling, use your
finger to level off.)
2. Pour entire cap of kernels down the hole on the top of the unit until cap is empty.
(See Illustration A)
3. Place cap back in its place.
4. Place a bowl or dish under the popcorn opening to allow popcorn to fill the bowl.
A B C
NOTE: When selecting a bowl, make sure to use one th at is large enough and will fit under
the popcorn chute.
5. Plug unit into outlet.
6. Turn unit ON (See illustration C showing ON/OFF button) and in just minutes, you
will have freshly popped popcorn to perfection!
7. When kernels have fully popped, turn unit OFF. You c an tip the popcorn maker
forward at this point to make sure you get all the popc orn out of the machine.
8. Eat popcorn as is or top with your favorite top pings such as:
Salt and Pepper
Seasoning Salts
Butter or Margarine
Caramel
Worcestershire Sauce
Food Coloring for fun
Parmesan Salt …and more
recipe ideas on page 4!
IMPORTANT - ALWAYS allow 15 minutes between p opping corn for machine to cool
so unit does not overheat and works effectively.