Nostalgia Electrics RSM-602 manual After Taking the Unit Out Of the Box, Illustration a

ENGLISH 3

INTRODUCTION

The RETRO SNOW CONE MACHINE
is easy to use, just follow these simple instructions.

After Taking the Unit Out Of the Box

1.Your RETRO SNOW CONE MACHINE
is already fully assembled, but has three separate bonus pieces.

1 side cone shelf

2 plastic cone holders (Paper cones not provided)

1 plastic shaved ice scoop

2.Before first use, lift off the clear safety power control lid, and remove the ice shaving canister. Remove the top housing lid off of the body and wipe clean the inside of the shaved ice collection chamber with a non-abrasive moist sponge, towel or cloth and then dry with a non-abrasive soft towel or cloth.

BREAKDOWN of parts	ILLUSTRATION A
		E. Shaved Ice
		Collection
		Chamber
A. Housing Top lid		F. Ice Feed
		insert
B. Cone Holders
		G. Ice shaving
		Canister

C. Shaved ice scoop

H. Locking cap for Ice shaving canister

D. Side cone shelf	H. Clear
	Safety power
	control lid

3.After cleaning the inside of the shaved ice collection chamber, put the housing top lid back on the ice collection chamber and base unit.

4.Locate the Ice Shaving canister. Unscrew and remove the center locking cap (This cap has “LOCK and UNLOCK” with directional arrows, clearly marked on the top) Separate the Ice Feed Insert from the Ice Shaving Canister. Carefully wash these parts in warm soapy water. Use extreme caution when cleaning and handling the Ice Shaving Canister. Blades are very sharp! Rinse and dry with a soft clean cloth. Reassemble the Ice Shaving Canister and lock the center locking cap securely. Return the Ice Shaving Canister to the receptacle hole in the top housing lid. Wash and dry the Clear Safety power control lid, and reposition over the Ice Shaving Canister.

5.Attach the Side Cone Shelf. NOW, you are ready to enjoy cool, refreshing icy snacks from your RETRO SNOW CONE MACHINE™.