Nostalgia Electrics RSM-602 Using Your Retro Snow Cone Machine, Illustration B, Illustration C

ENGLISH 4

USING YOUR RETRO SNOW CONE MACHINE™

First, find a stable surface near an electrical outlet to place your snow cone machine. (Make sure your cord is away from any water source. If needed, it is acceptable to use an extension cord.)

A.Before plugging in your unit, to add ice cubes, remove clear power control lid from your RETRO SNOW CONE MACHINE™, by turning clockwise, lift and remove.

B.Place ice cubes in the ice feed canister allowing enough room for the clear power control lid to be placed back on easily.

ILLUSTRATION B

Ice Feed Canister with ice

C.Plug in unit with lid in the OFF position.

D.Turn the clear power control lid counter clockwise, to the ON position. This will activate the unit to begin shaving (To turn “OFF” shaving unit, simply turn the lid clockwise.)

NOTE: “ON” / “OFF” is clearly marked on the clear power control lid with directional arrows. See illustration C below.

ILLUSTRATION C

E.Turn the clear power control lid clockwise to turn off the unit and refill the ice feed unit with ice. Repeat STEPS D and E until you have shaved the amount of ice desired.

F.Use the shaved ice scoop to shovel shaved

ice from the collection chamber (accessible through the side door) to your cone to create your favorite treats. We have included a few recipes on page 5 of this manual to enhance the enjoyment of your snow cone machine or use your imagination and create your own recipes.

ILLUSTRATION D

Showing designed use of cone shelf and

Plastic cone holders. (Paper cones not

Included)

Whatever you create, we are sure the RETRO SNOW CONE MACHINE™ will make it fun for the whole family!