Overview

The NovaTech 8000 Series I/O is the newest remote I/O family native to the D/3® Process Automation System (PAS). It is the preferred I/O for new installations and it can replace the older NovaTech 16000 series I/O

in existing PCM cabinets, using existing field wiring connected to new termination panels with existing connectors.

With its -40 to +70° temperature range and G3 cor- rosive coating, the NovaTech 8000 Series I/O is an I/O system designed for field mounting. It connects to conven-tional and smart field devices through multi- channel I/O modules. The modules communicate, via a fast internal bus, with redundant Ethernet Bus Inter- face Modules (EBIMs) which provide dual-redundant high speed Ethernet data connections to the D/3®.

Up to 64 I/O modules can be supported within a single 8000 Series node, and each module has between 4 and 16 channels. An EthernetMPC card can support up to 50 nodes. With the availability of intrinsically safe modules, 8000 Series I/O provides a solution for both general purpose and hazardous area applications - even within the same node.

Designed for use with PCM 4100 or PCM 4200 PCI- based PCMs, it requires an Ethernet Multi Protocol Controller (EthernetMPC) card and D/3® version 12.2-2 or higher.

8000 Series I/O

Product Catalog

Key Features

•Wide range of input and output types, in any mix

•Up to 64 I/O modules per node

•Up to 50 nodes per EthernetMPC card

•Wide operating temperature range, -40 to +70°C

•General-purpose and intrinsically-safe I/O within a single node

•Redundant Local Area Networks (LAN) and power supplies supported

•High channel density

•Zone 2 and Division 2 hazardous area mounting as standard

•I/O module hot-swapping even in Zone 2 and Divi- sion 2

•HART® pass-through supported

•Rugged construction, optimized for true field mount- ing

•Integrated (per-channel) fusing and loop-disconnect facility

•Bussed field power on carriers eliminates daisy-chain wiring at field terminals

•Sophisticated mechanical keying system eliminates risk to plant and personnel

8000 Series connects to both conventional (such as 4-20mA) and smart field devices. It allows the cost benefits of fieldbus to be enjoyed with existing field instruments—ideal for plant upgrades and expan- sions. Pass-through of HART® information between HART® instruments and the D/3® network is possible.

8000 Series nodes can be located within, and con- nected into, a hazardous area where there is a risk of explosion from flammable gases. The standard, general purpose system is approved for operation in a Zone 2 or Class I, Division 2 hazardous area, with field devices in a similarly classified area. I/O modules with intrinsically safe field circuits can be connected to certified devices in Zone 0 and Class I, II, III, Division 1 hazardous areas.

Enclosures are also available for application where the Series 8000 node must be located in a Zone 1 or Divi- sion 1 area—consult NovaTech for availability.

Contact:

NovaTech Process Solutions, LLC

T: 410.753.8300

11500 Cronridge Dr., Suite 110

Toll Free: 800.253.3842

Owings Mills, MD 21117

www.novatechweb.com

®

8000 Series I/O

Page 3 Page 5
Page 4
Image 4
NotaTech 8000SeriesI/O manual Overview
Page 3 Page 5

8000SeriesI/O specifications

The NotaTech 8000 Series I/O is a cutting-edge technology designed to revolutionize industrial automation and process control systems. As industries increasingly seek to enhance productivity and efficiency, the 8000 Series I/O steps up by providing a robust and flexible interface to integrate various sensors, actuators, and controllers.

One of the standout features of the NotaTech 8000 Series I/O is its modular design. This allows users to customize their I/O configuration according to the specific requirements of their applications. With a range of modules available, including digital, analog, and specialty I/O, users can easily scale their systems to meet evolving demands.

Another key characteristic of the 8000 Series I/O is its high-speed data communication capabilities. Utilizing advanced protocols such as EtherCAT, PROFINET, and Ethernet/IP, the system ensures rapid data transfer between devices, significantly reducing latency in control loops. This high-speed communication supports real-time performance, making it ideal for time-sensitive applications.

The NotaTech 8000 Series also boasts an impressive level of reliability and durability. Engineered for harsh industrial environments, the modules are built to withstand extreme temperatures, vibrations, and humidity. IP ratings ensure protection against dust and water ingress, contributing to prolonged operational life and minimal downtime.

Incorporating state-of-the-art diagnostics, the 8000 Series I/O provides comprehensive monitoring of system health. Users can access diagnostic data through user-friendly interfaces, allowing for proactive maintenance and troubleshooting. This feature not only reduces maintenance costs but also enhances the overall system reliability.

Another notable technology integrated into the NotaTech 8000 Series is its support for various fieldbus systems. With multi-protocol support, users can connect easily to existing infrastructure without the need for system overhauls. This flexibility promotes interoperability and eases upgrades as technology evolves.

Security is paramount in industrial environments, and the NotaTech 8000 Series I/O addresses this with built-in cybersecurity features. These include secure communication channels and access controls, safeguarding against potential cyber threats and ensuring data integrity.

In summary, the NotaTech 8000 Series I/O stands out in industrial automation for its modular adaptability, high-speed communication protocols, rugged design, advanced diagnostics, multi-protocol support, and a strong focus on cybersecurity. As industries continue to innovate and evolve, the 8000 Series I/O positions itself as a vital component in the quest for increased efficiency and reliability in automation systems.
Top Page Image Contents