DIMENSION 3 & 4 AMPLIFIERS

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

SERVICE INSTRUCTIONS

Disconnect power cord before servicing

Replace critical components only with factory parts or recommended equivalents

For AC line powered units - Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metallic parts. The resistance should be no more than 100,000ohms.

Check the total maximum power of your AC wall outlet. If you connect several units to one wall outlet you could overload the wall outlet, which could cause fire.

Health Advice: This unit produces and absorbs electromagnetic radiation. The strength of radiation and the sensitivity for disturbing interference matches the CE requirements. A corresponding sign is printed on the backside of the unit. Any change or modification may affect the behavior of the unit concerning electromagnetic radiation, with the CE requirements eventually not to be met any more. The manufacturer takes no responsibility in this case.

Unpacking / Setup: Please check your amplifier for any damage after unpacking (before connecting) and contact your dealer in case of any related complaints. Take care of choosing your installation place and the correct AC connection. If built into a case, be aware that the depth and the weight of the amplifier does require an additional fixing on the backside or the use of rack shelf supports. Never mount the amplifier in a rack just by fixing it on the front plate - we can show no responsibility for damage on the rack or the amplifier in this case.

Always try to separate low level cables (input cables) and high level cables (AC net and speaker outputs) to avoid interference.

DOUBLE INSULATED - When servicing use only identical replacement parts

For 220-volt use in USA, use NEMA style 220-volt plug. For other countries use proper plug for local outlet.

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Please return the enclosed warranty card to register unit with us.

 

MODEL: __________________________

PURCHASED FROM:_________________________

 

SERIAL NUMBER:___________________

DATE OF PURCHASE:________________________

 

 

 

 

 

- The Leader in DJ Technology

 

 

©2001 Numark Industries

- 3 -

http://www.numark.com

Page 3
Image 3
Numark Industries 3, 4 manual Service Instructions