CD PLAYER
LINE OUT |
RELAY CABLE
MIXER
LINE LINE
IN 
IN
CD PLAYER
LINE OUT
POWER SUPPLY
CD PLAYER QUICK SETUP (ENGLISH)
1.Make sure all items listed on the front of this guide were in the box.
2.READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3.Study this setup diagram.
4.Place mixer in an appropriate position for operation.
5.Make sure all devices are turned off and all faders and gain knobs are set to “zero”
6.Connect all stereo input sources as indicated in the diagram, your microphone, and headphones
7.Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8.Plug all devices into AC power.
9.Switch everything on in the following order.
∙audio input sources (i.e. turntables or CD players)
∙mixer
∙last, any amplifiers or output devices
10.When turning off, always reverse this operation by,
∙turning off amplifiers
∙mixer
∙last, any input devices
11.Go to http://www.numark.com for product registration.
More information about this product may be found at http://www.numark.com
FEATURES:
1.PLAY/STUTTER- To start the music from the initial cue point.
2.PAUSE- To pause the music.
3.CUE- To move the music to the cue point and preview the selection.
4.JOG WHEEL-
a.INNER WHEEL- Used for various functions such as cueing, scratching, pitch bend, searching, and effect control
b.OUTER PITCH WHEEL (AXIS 9) - Used for temporary pitch bend.
5.LCD DISPLAY- Indicates all the functions, as they are occurring, with the CD.
6.OPEN/CLOSE- Pressing will open or close the disc tray on the transport.
7.SGL- To set play mode in single or continuous play.
8.TIME- Controls display indication of time mode.
9.PROGRAM- Used for setting track order and various special commands.
10.TRACK SELECT/SEARCH-
a.Rotation – selects tracks
b.Pressing while rotating – selects tracks +10
c.Pressing once- Puts wheel in search mode.
11.PITCH- Actives and sets pitch slider range.
