Numark Industries CDN-12 manual Beat Matching Using Pitch Bend, Using The Loop

CDN-12

BEAT MATCHING USING PITCH BEND

BPM’s (Beats Per Minute) are the same, however, the drum beats are not matched

This description is for the case of matching the beat of the CD PLAYER to the beat of the music being played from another source .

After Matching the BPM adjust the pitch temporarily as follows:

When the CD PLAYER is ahead press the -- or rotate the jog wheel counter clockwise

When the CD PLAYER is behind press the or rotate the jog wheel clockwise

+

or or

The pitch changes automatically while the + or -- button is being pressed or the jog wheel is rotated. The faster you rotate the wheel the more you change. Releasing the button or wheel results in a return to the original pitch. (So the BPM’s are once again the same.)

USING THE LOOP

This function is repeating certain areas of the CD. Such as vocal stabs or for allowing the beginning of a song repeat itself so you may leave the DJ console and interact directly with your crowd

Press the

Press the "LOOP" button

	"LOOP" button	again
Position on the disc	LOOP	LOOP
	LOOP interval	Continuation of play
		after third press
		of "LOOP" button

Return to LOOP in point

To set a loop start point just press the “LOOP” button while the CD is playing when it reaches the desired start point.

To start looping press the “LOOP” button again when the desired loop end point is reached. Looping is not seamless on this unit. When it reaches the end point again it returns to the start point and continues to repeat this action. When the “LOOP” button is pressed again the CD will continue on when it gets to the end point.

Numark - The Proven Leader in DJ Technology

©1998 Numark Industries 12 http://www.numark.com