![](/images/new-backgrounds/1039597/3959721x1.webp)
The Beatkeeper™ III and Interlock mode
The
The Bar Graph: Most dance music and rock is set up in 4 beat increments called measures. Many of the features within the
begins. Occasionally this may not be correct or you may wish to reset it. To reset the down beat simply tap the at the new downbeat location as the music is playing or in pause.
BEAT SYNC: This button is used for resetting the downbeat and also | BPM | |
is considered by many to be the most accurate automatic beat counter on the market today, however, it | ||
| ||
occasionally may have trouble determining the correct BPM. This will happen when the music contains complex | From display | |
rhythms or may start without a beat at all. If the BPM showing in the display you know is incorrect or the beat | ||
|
LEDs are not flashing with the beat you have 2 options to reset the Beatkeeper. The first way is to tap on
the downbeat and hold for a second. This will tell the unit to search and display the next BPM it finds. If this
doesn’t work you can manually tap on the beat and the display will indicate the new BPM. The BPM will be based upon the average of your last 8 taps. The Beatkeeper will then know which beats in the music it should be using to determine the correct BPM and track them through the song.
|
| Sometimes the unit will be tracking the wrong beat but have the correct BPM. To reset the downbeat simply | ||
BEATs not | BEATs | tap the | once on the down beat. | |
Marching Bar Graph: This is the middle graph that compares the music from both units. When the BPM and | ||||
matched | matched | |||
down beat match the green middle LEDs will also light up indicating a perfect mix when beat mixing. | ||||
|
|
INTERLOCK: This button will automatically match the BPM both sides of the CDN
pressed you will see the BPM display of the slave automatically change to match the master and the pitch indication in the display change the amount needed to match speeds. During interlock all pitch functions of the slave will deactivate and follow everything you do with the master. All
actions of the slave such as loop functions, , and PLAY will now also be beat aligned with the master.
•If both units are playing the slave will adjust to match to the nearest beat of the master.
•If is pressed the slave will now start with the next beat of the master.
•If is pressed during
, the slave will automatically start the next time the master matches the beat of the slave.
When the slave becomes the master or is released from interlock and still playing, the pitch playing will often be different than the original position of the pitch slider. The pitch slider will not function until it is brought to the new position. Move the pitch slider in the direction shown in the display. For example if the display says “INC 4.5%” move the slider in the positive direction 4.5% (increase). If it says “DEC
Smart Looping
The Beatkeeper and Looping can work together to create perfect loops every time. In order to work correctly first properly align the Beatkeeper™ on
the beat. To active smart looping hold down followed by
at the same time. After this has been done all loop points and stuttering will play perfectly to the beat of the music.
| - The Leader in DJ Technology |
|
©2000 Numark Industries | - 11 - | http://www.numark.com |