Numark Industries CDN90 CDN90, LOOPING OPERATIONS

CDN90

LOOPING OPERATIONS

LOOPING: A loop is any area of a CD that you choose to repeat with no breaks. On the CDN90 two seamless loops are possible.

LOOP IN: The “LOOP IN” point is where you wish for the

loop to start. The initial “CUE” point of the CD is also the

default “LOOP IN” point for both loops or “Hot Start” point. If

you wish to set a new “LOOP IN” point, just press while

the CD is playing when it reaches the desired point. The

button will light indicating a new loop is set. The button

and in the display will also illuminate indicating a

point has been set and is accessible for “STUTTER”. By default

the “LOOP IN” also becomes the “STUTTER” or “HOT START”

point.

NOTE: The CD Player will always remember a new set point as the “LOOP IN” or “HOT START” point until

you actually set a new “LOOP IN” point or put in a new CD. The new point will be accessible until y ou

remove the CD from the unit. If you change tracks and you previously set a “Loop In” on another track,

pressing will jump to that point.

LOOP OUT: The “LOOP OUT” determines the end point for a loop. The first time you press while a CD is in play

mode, the “LOOP OUT” LED will turn on and flash while the song automatically returns to the “LOOP IN” point with no

breaks and continues to play. When the song reaches the “LOOP OUT” point again it returns to the “LOOP IN” point and

continues to repeat this action. You will notice the “LOOP IN” LED will also be flashing during loop action. To release or

end the LOOP press a second time and play will continue forward when the song passes the previously set “LOOP

OUT” point. The “LOOP OUT” LED will be lit solid indicating that the “LOOP” is now in memory for “RELOOP” purposes.

Note: The “LOOP OUT” point will be erased if “LOOP IN” is pressed or a new “CUE” point is set after th e “LOOP OUT”

point. This is important because without this point “RELOOP” will not be possible.

SMART LOOPING: The Beatkeeper and Looping can work together to set perfect loops every time. In order to work correctly first

properly align the Beatkeeper™ on the beat. To active smart looping hold down followed by at the

same time. After this has been done all loop points and stuttering will play perfectly to the beat of the music.

- The Leader in DJ Technology