Numark Industries CDN90

CDN90

MOVING LOOP POINTS: The “LOOP IN” point

can be moved while the music is playing

just by pressing at the new desired

point. The next time “LOOP OUT” is

reached the CD will return to this new

“LOOP IN” point. If “LOOP IN” is press

after the “LOOP OUT” point it will clear the

“LOOP OUT” point.

The “LOOP IN” point can also be edited

while paused. First hold down then

press to move to the loop in point.

Next rotate the wheel to search for a new

cue point and then press again to set

the new point. Check your point by

pressing .

The “LOOP OUT” point can also be moved while

a loop is playing. Press to release the old

“LOOP OUT” point and pressing it again at the new desired point.

RELOOP/STUTTER This button performs 2 different functions depending on loop setting.

Reloop is only possible if “LOOP” points have been

previously set. The “RELOOP” function automatically

returns the music to the “LOOP IN” point and will play

the loop until it is released with the “LOOP OUT”

button.

Stutter starts instant play from previously set “Hot”

points. Simply set your stutter (Hot Start) point by

follow the directions for setting loop in because the

points are the same. Remember the button serves

also for the reloop function so if a loop out has

been set the unit will also loop until released.

This function lets you set 3 Hot Start points. The first

is based on the “PLAY” cue point and the second two

are based upon “LOOP IN”. Since the default “LOOP

IN” points are also the initial start point your unit can

be “stutter” started from up to 3 buttons.

NOTE: The CD Player will always remember a new set “Hot” points until you actually set a new “LOO P IN” point

or put in a new CD. The new point will be accessible until you remove the CD from the unit. If you change

tracks and you previously set a “Loop In” on another track, pressing will jump to that point.

- The Leader in DJ Technology