Numark Industries CDN 33 Front Panel Features, Numark Industries, The Leader in DJ Technology

Models: CDN 33

1 16
Download 16 pages 63.89 Kb
Page 6
Image 6
FRONT PANEL FEATURES

CDN 33

FRONT PANEL FEATURES

1.Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray door will automatically close in 30 seconds if left open. This is to protect the tray from accidental damage while open.

2.Single: Toggles the unit to play back just one track at a time (single) or play continuously through all tracks and then start over repeating the CD infinitely (continuous).

3.Time: Switches the time modes on the display between elapsed playing time, remaining time on the track, and remaining time on the total CD. When toggled to remaining time total the total number of remaining tracks will also show.

4.LCD Display: Indicates all the functions, as they are occurring, with the CD.

5.Track Knob: Rotate this knob to select tracks.

6.Search Knob: Pressing the track knob allows you to use the jog wheel and rapidly scan the music to find a cue point. The search function automatically shuts off after 8 seconds of non-use or you may toggle it off.

7.Track Buttons: These buttons are used to select the track to be played.

8.Player selection Button: Press these buttons to determine which player the track selection buttons will affect.

9.Program: Depress this button and the unit will stop and the program indicator will light. Select each track to be programmed and press the PROGRAM button between selections. You can program up to 30 tracks. Press PLAY to start the program. To exit and erase program hold the program button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.

10.Cue: Returns and pauses the music at the last set cue point. The cue point is where the music will begin when play is pressed. The cue point is set as the initial start point on a track or can be moved when play is started at a different point. For instance if the music is paused then play is pressed a new cue point is set. You can easily edit the cue point by turning the wheel during pause. As you rotate the wheel the music will sound. By stopping the wheel and pressing play a new point is set. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times.

Note: Pressing cue 2 times plays music temporarily from this point until the button is released.

©2001 Numark Industries

- The Leader in DJ Technology

http://www.numark.com

- 6 -

Page 6
Image 6
Numark Industries CDN 33 manual Front Panel Features, Numark Industries, The Leader in DJ Technology