CDN 36
BEFORE SWITCHING OFF THE POWER
When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power.
DO NOT switch off the power when | Switch off the power after the |
the disc holder is open. | disc holder has been closed |
| with the “OPEN/CLOSE” button |
TROUBLESHOOTING
Symptom | Possible Cause | Corrective Action |
|
|
|
The power fails to switch on when | Poor power plug connection at the | Insert the power plug firmly into |
the POWER switch is set to on | AC outlet or IEC Power cord loose | the AC outlet and make sure |
| from rear of unit | connection is good in unit rear |
Disc play does not start | The disc is loaded upside down | Reload the disc with the label side |
| The disc is too dirty | up |
|
| |
|
| Clean the disc |
|
|
|
No sound | Improper output cable | Connect the output cables |
| connections | correctly |
| Improper amplifier operation | Check amplifier setup |
Sound skips | The CD player is subject to | Change the installation location |
| vibrations or physical shock |
|
| The disc is too dirty | Clean the disc |
Hum | Loose cable connections | Firmly connect all audio plugs |
|
|
|
| - The Leader in DJ Technology |
|
©2002 Numark Industries | - 18 - | http://www.numark.com |
