Numark Industries PA5Pro owner manual PA5PRO FRONT PANEL DIAGRAM AND FEATURES

PA5Pro

PA5PRO FRONT PANEL DIAGRAM AND FEATURES...

		3
1	2	4	5	6	7	8	9	10

If the P A 5 P R O is your first preamplifier, please read this entire manual before you begin operation.

The P A 5 P R O can be rack-mounted or used as a free-standing unit (1-19" rack unit space).

1.Power Switch and Power - On LED.

MIC SECTION

The P A 5 P R O has 2 extremely controllable DJ Mic channels. The mute switch on the rear panel (2) automatically reduces the level of the music when the DJ Mic is spoken into.

2.Neutrik™ “Combo” connector allows connection of either a 1/4” jack or an XLR jack. This is ideal for connecting an XLR gooseneck directly into the mixer.

3.Treble, Mid, and Bass Controls fine tune the tone of your voice on both mics through the sound system. The controls are detented for setting tone "flat". For best results, use a dynamic cardioid microphone.

4.The DJ Mic volume controls the DJ Mic

volume for the Neutrik™ “Combo” connector.

5. 3-Band Master Equalizer (EQ) . The EQ compensates for differences in source material sound quality. The EQ can be used to tailor the sound to the acoustical requirements of the room. The knobs have a center detent for an accurate "flat” response. Start with this position if you've never used a graphic EQ before and then slowly adjust the bass, middle, or treble to a desirable position.

6.The Loud button boosts the bass frequencies to add more presence to the audio signal.

7.The Mono button is pressed to merge the left and right channels of input to become the same output.

8.The Input Selector determines which source will be live to the outputs based on what you have connected to the rear panel input section.

9.The Master Volume controls the overall output level and the headphone output level.

10.The Headphone jack is supplied so you may monitor the output of the preamp directly.

Numark - The Proven Leader in DJ Technology

©1997 Numark Industries 6 http://www.numark.com