ENGLISH
Quick Setup Guide
1.Make sure all items listed on the front of this guide are included in the box.
2.READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
3.Study this setup diagram. There are various ways to use the product. The diagram shows ways in which you can utilize the features of this product.
4.Place device in an appropriate position for operation.
5.Make sure all devices are turned off.
6.Connect all input sources as indicated in the diagram.
7.Connect the outputs to monitors.
8.Plug your device and other devices into AC power.
9.Switch everything on in the following order:
•Video input sources (i.e. DVD players, cameras, etc)
•Your device.
•Any monitors, mixers or projectors
10.When turning off, always reverse this operation by turning off everything in the following order:
•Any monitors, mixers, or projectors.
•Your device.
•Video input sources.
11.Go to http://www.numark.com and register your product.
Installation
This device may be mounted in a standard 19” rack taking up 3 spaces. This device may also be placed on a table by rotating the screen as shown above.
We recommend mounting the device in the top portion of your rack so you can have the best viewing angle.
DO NOT USE EXCESSIVE FORCE TO PIVOT THE SCREEN.
DO NOT LEAVE THE DEVICE IN DIRECT SUNLIGHT.
2
