![](/images/new-backgrounds/1150397/1503979x1.webp)
REAR PANEL FEATURES
|
|
|
|
| 5 | 6 | 5 | 6 |
|
|
|
|
|
|
|
|
| ||
11 | 10 | 9 | 8 | 7 | 4 | 3 | 4 | 3 | 2 |
| |||||||||
|
|
|
|
|
|
|
| 1 |
1.MIC INPUT – Connect a ¼” microphone to this input. Microphone controls are located on the top panel.
2.
3.LINE PHONO INPUTS (RCA) – Connect your audio sources to these inputs. These inputs can accept both line and
4.LINE INPUTS (RCA) – Connect
5.LINE PHONO SWITCH – Flip this switch to the appropriate position, depending on the device connected to the LINE PHONO INPUTS. If you are using
6.GROUNDING TERMINAL – If using
Note: Some turntables have the grounding wire built into the RCA connection and, therefore, nothing needs to be connected to the grounding terminal.
7.RECORD OUTPUT (RCA) – Use standard RCA cables to connect this output to a recording device, such as a CD recorder or tape deck. The level of this output is based upon
8.MASTER OUTPUT (RCA) – Use standard RCA cables to connect this output to a speaker or amplifier system. The level of this output is controlled by the MASTER knob on the top panel.
9.MASTER OUTPUT (BALANCED) – Use balanced ¼” (TRS) cables to connect this Master output to a speaker or amplifier system. The level of this output is controlled by the Master knob on the top panel.
Tip: When possible, we recommend using these balanced outputs for your Master audio output. Balanced outputs are better suited for long cable runs and are less susceptible to noise and interference.
How do I know if my ¼” cables are balanced?
BALANCED
UNBALANCED
10.AC IN – Use the included power adapter to connect the mixer to a power outlet. While the power is switched off, plug the power supply into the mixer first, then plug the power supply into a power outlet.
Note: The mixer is designed to work with the included AC power supply only. Using an incompatible power supply could result in damage to the unit.
11.POWER SWITCH – Turns the mixer on and off. Turn on the mixer after all input devices have been connected and before you turn on amplifiers. Turn off amplifiers before you turn off the mixer.
5