INTRODUCTION

Welcome to the X6 professional 2-channel mixer. Here are some of the features that you will come to love about this device:

ƒ24-bit digital mixing with noise-free controls

ƒ12 effects (6 for Channel 1/Channel 2; 6 for Mic/Aux), routable to Channel 1, Channel 2, Mic/Aux, or Master

ƒComprehensive, easy-to-use effects interface includes beat sync tap button, wet/dry fader, and rotary parameter control

ƒSteep 3-band EQ on each input channel with EQ Kill switches

ƒVariety of inputs (2 phono with phono defeat switch, 2 line, and 1 mic/stereo aux)

ƒSmooth crossfader with continuous rotary slope control and reverse switch

ƒLook-ahead peak limiting on headphone and master outputs

We hope that the X6 serves you well for many years to come.

Sincerely,

The People of Numark

BOX CONTENTS

ƒX6

ƒAC Power Adapter

ƒQuickstart Guide

ƒSafety & Warranty Information Booklet

REGISTRATION

Please go to http://www.numark.com to register your X6. Registering your product ensures that we can keep you up-to-date with any last-minute product developments and provide you with world-class technical support, should you run into any problems.

GROUND RULES

1.Make sure all items listed in the BOX CONTENTS section are included in the box.

2.READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.

3.Study the connection diagram in this guide.

4.Place mixer in an appropriate position for operation.

5.Make sure all devices are turned off and all faders and gain knobs are set to “zero”

6.Connect all stereo input sources as indicated in the diagram.

7.Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.

8.Plug all devices into AC power.

9.Switch everything on in the following order.

audio input sources (i.e. turntables, CD players, etc.)

mixer

last, any amplifiers or output devices

10.When turning off, always reverse this operation by,

turning off amplifiers

mixer

last, any input devices

3

Page 3
Image 3
Numark Industries X6 quick start Introduction, BOX Contents, Registration Ground Rules