Architectural & Engineering Specifications October 2006
DESCRIPTION
LIGHT FIXTURE:
•Corrosion resistant finish
•
•Satin nickel finish (Model 754SNNT)
•Frosted glass shade
•Close mount design
•Uses two 60 Watt maximum, candelabra base bulbs. Bulbs not included.
•Vent openings in fixture base for exhaust fan
•Light fixture assembly is
BLOWER:
•
•Polymeric blower wheel
HOUSING:
•Rugged,
•Sturdy
•Tapered, polymeric duct fitting with
NOTE: For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (Type I.C.) Use supply wiring rated for at least 90° C
Decorative
Light / Fan
MODELS 754RBNT & 754SNNT
SPECIFICATIONS
VOLTS | AMPS | CFM | SONES | DUCT | |||||
|
|
|
|
|
|
|
|
|
|
120 |
| 2.2 | 70 | 3.5 | 4" Round | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ARCHITECT'S SPECIFICATION
•Decorative Light/Fan unit shall be NuTone Model 754RBNT (754SNNT).
•Unit shall have galvanized steel housing with dual integral mounting brackets. It shall be ducted to a roof or wall cap.
•Blower assembly shall be removable and have a permanently lubricated motor.
•Light fixture assembly shall be
•Lamps shall be two 60 Watt maximum, candelabra base, incandescent.
•Air delivery to be no less than 70 cfm and sound level no greater than 3.5 sones. Air and sound ratings shall be certified by HVI.
•Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
INSTALLATION
Complete installation instructions are included with each Decorative Light / Fan.
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227
REFERENCE | QTY. | REMARKS | Project |
|
|
|
| Location |
|
|
|
| Architect |
|
|
|
| Engineer |
|
|
|
| Contractor |
|
|
|
| Submitted by | Date |
|
|
|
|
|
|
|
| 60K | 99043980A |