FINAL ASSEMBLY INSTRUCTIONS
1.Check louvers in fan housing and outside wall cap to see that they are not damaged or binding. Louvre can be readily removed by depressing spring bearings on end of hinge pins.
Refer to Figure 5. Install motor and blade assembly into housing. Be sure motor leads are toward receptacle. Plug motor lead into receptacle. Spin blade to be sure it turns freely.
2.Fasten grille in place with thumbscrew (furnished.)
BE SURE UNIT AND SWITCHES ARE PROPERLY GROUNDED AND ALL WIRING COMPLIES WITH LOCAL CODE REQUIREMENTS.
MAINTENANCE AND CLEANING
FILTER
To clean the filter (optional,) soak in hot, sudsy water. Rinse thoroughly and allow to dry.
GRILLE
Use only a mild soap and water solution to clean the grille. Do not use abrasive cleaners.
FIGURE 5
