NuTone NC300 series Turn Music Source On and Off, Adjust System Music Volume, Select Music Source

models nm100 • nc300

•Talk

Talk to all remote stations set to Intercom or Radio/INT.

•Speaker Volume

Use Speaker Volume knob to adjust the remote speaker volume.

•Music Volume

Turn Music Source On and Off

You can turn the Music Source on and off from the NRS104WH or the NPS104WH Remote Station.

To turn the Music Source on, press and hold the MUSIC VOLUME UP button.

To turn the Music Source off, press and hold the MUSIC VOLUME DOWN button until the volume level goes to zero.

Adjust System Music Volume

Adjust the system music volume from any Remote Station by pressing VOLUME UP or VOLUME DOWN.

•Select Music Source

The system music source can be selected from any Remote

Station. The music sources that are available vary depending on the Scan setting on the Master Station (See Master Station

Settings/Music Settings/Scan Mode for details).

Note: You cannot select specific tracks on the CD from a

Remote Station.

To scan for a music source:

Simultaneously press and release VOLUME UP and VOLUME DOWN to switch music sources.

Page 

Remote Station Operation 3-Wire (NuTone Retrofits) Remote Station Functions

•Door

Press Door to talk to the Door Station. Release button to listen to the Door Station.

•Remote

Press Remote to talk to Remote Stations. Remote Stations press Talk to reply.

•Speaker Volume

Use Speaker Volume knob to adjust the remote speaker volume.

•Music Volume

Turn Music Source On and Off

You can turn the Music Source on and off from the Remote

Station.

To turn the Music Source on, press and hold the MUSIC VOLUME UP button.

To turn the Music Source off, press and hold the MUSIC VOLUME DOWN button until the volume level goes to zero.

Adjust System Music Volume

Adjust the system music volume from any Remote Station by pressing VOLUME UP or VOLUME DOWN.

•Select Music Source

The system music source can be selected from any Remote

Station. The music sources that are available vary depending on the Scan setting on the Master Station (See Master Station

Settings/Music Settings/Scan Mode for details).

Note: You cannot select specific tracks on the CD from a

Remote Station.

To scan for a music source:

Simultaneously press and release VOLUME UP and VOLUME DOWN to switch music sources.

Note: If you press and hold these buttons for 4 seconds or more, you initiate the Security/Home Automation function (See Intercom Operation/Security/Home Automation for details). This function is not available on the outdoor remote station.

Note: If you press and hold these buttons for 4 seconds or more, you initiate the Security/Home Automation function (See Intercom Operation/Security/Home Automation for details). This function is not available on the Outdoor Remote Station.