model NM100WH
The door release switch contacts are very versatile and can be used with many AC/DC door or switch contacts. Be sure to use the wire and power supply or transformer specified by the door or gate release product being used.
Panic Interface with Security System
Run a line of 18 gauge solid copper, twisted pair approved low voltage cable from the NWH300 or NWH300C
testing
After all connections have been made, insert the NM100 power plug into NA300TA transformer and secure the master to the
Please be careful to only apply pressure on the speaker panel at the corners and not in the middle. Check all functions by following the guidelines in the Owners Manual shipped with the master unit. If any difficulties are encountered, recheck all connections. If after reviewing these instructions you are unable to resolve any problems, contact technical support at
Page
appendix a - nutone systems
*Refer to frames below:
•NF100MWH – Replacing a master only system with an NM100 master
•NF100CWH – Replacing a combination system with an NM100 master and NC300 CD player
•NF200CWH – Replacing a master only system with an NM100 master and NC300 CD player (requires hole in wall to be made larger)
•NF300RWH – Used on all indoor remote station replacements
•NF300PWH – Used on all outdoor or high sun area flush mount remote station replacements
•NRKS200PWH – Used on all outdoor surface mount remote station replacements
•NF300DWH – Used on older NuTone door station replacements, not required for M&S replacements
