2. PREPARE THE INSTALLATION
Make sure that the following items are included:
-Range hood
-Accessories:
•Filters
•Bag of parts including:
(4)lock nuts, (1) wire clamp, (8) 1/2” double thread screws, (2) wire connectors,
(2) 1/2” standard screws, (6) 3/8 screws. Parts sold separately:
-Interior blower Model P5 includes blower,
-Interior blower Model P8 includes blower,
-
-
-Exterior blower assembly 331H, 332H, 335 or 336
-Halogen lights (120V, 50W, PAR 20)
-Heat lamps (120V, IR 175W, PAR 38)
-RMP Series Backsplash (optional)
-Baffle filters (optional)
-Transitions, duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model numbers.
NOTE: For cabinets with recessed bottom, attach wood filler strips (not included) on each sides, as shown below. Use two (2)
| HOOD |
| LOCATIONS |
|
| ||
| WIDTHS | A |
| B |
| C | |
| 30’’ | 2’’ |
| N/A |
| N/A |
|
| 36’’ | 2’’ |
| 41/2’’ |
| 41/2’’ |
|
| 42’’ | 2’’ |
| 71/4’’ |
| 81/4’’ |
|
| 48’’ | 4’’ |
| 101/4’’ |
| 111/4’’ |
|
A |
| A |
HD0079 | B | C |
3. INSTALL BACKSPLASH (OPTIONAL)
Backsplash must be installed before the hood shell because the hood shell covers the backsplash top mounting screws. In order to be able to install the backsplash, make sure you have at least 18’’ clearance between bottom of hood and range control panel or cooktop. (See instructions packed with backsplash.)
4. SELECT BLOWER OPTION (EXTERIOR OR INTERIOR)
INTERIOR BLOWER: | Follow all subsequent steps of this manual. |
EXTERIOR BLOWER: | Refer to instructions packed with exterior blower and follow steps 6, 10, 12 and up of |
| the present manual. |
- 6 -
