NuTone VSC4S INSTALLATION

INSTALLATION

Check (_) for following VSC4S carton contents:

¨VSC4S Door Camera with mounting frame and

rubber gasket

¨Hardware bag assembly containing:

(2) #6 x 1 1/4" screws

(2) #6 x 3/4" machine screws

(1) 4mm camera attachment screw

¨Installation Instructions

VSM4SK VSUC4SK

Note to Installer: Do not discard these instal-

lation instructions. Please give all installation

instructions, warranty registration and home-

owner’s manual to homeowner.

PRECAUTIONS AND GUIDELINES

The NuTone VSC4S door camera has been designed to

work with NuTone models VSM4SK or VSUC4SK.

Please read and follow ALLinstallation instructions,

guidelines and precautions. Any deviation from these

instructions or miswiring combinations will cause the

unit to fail and all NuTone warranties will be void.

Following are the installation instructions for the VSC4S

Camera. Please refer to the installation instructions

and homeowners manual packed with the VSM4SK

or VSUC4SK when installation and operating these

models.

WARNING: 120 Volt AC power to the VSM4SK

rough-in and VSUC4SK monitor must remain

off until all system wiring and product mount-

ing at the monitor and camera is complete.

•Observe all local regulations and codes in your area.

•All screw terminals at the camera, VSM4SK or

VSUC4SK must be secure.

• Observe all color codes of wires when connecting cam-

era to VSM4SK or VSUC4SK.

• The VSC4S is designed to be used with category 5, or

category 6 cable (purchased separately). The use of

cable other than category 5, or category 6 cable will

void all NuTone warranties and may result in faulty

installation and improper operation.

• The door camera must not be mounted in an area

that would be subject to direct sunlight or a strong

reflection from the sun.