STEP 2 : CABINET ASSEMBLY CONTINUED
Open Box VP5 or VP2.
1Insert Cam Pins (E) into SIDE PANEL’S predrilled holes both sides down to TAB. (May require some force)
2Attach SIDES to Back/Bottom/Top by Carefully aligning edge holes over Cam Pins and gently push together to avoid damaging cam pins. CHECK PANEL ORIENTATION !!!
Insert Cam and make sure Arrow points to outside edge, use allen key provided or #3 phillips screwdriver. Start locking one cam at each end first. Lock all Cams.
Cam Arrow faces away from outside edge when tightened.
CHECK PANEL ORIENTATION !!! 
TOP !!!
2
���� | 1 |
| |
| E |
2 HOLES FOR MODEL 110
3 HOLES FOR MODEL 220
BOTTOM
PANEL
Place cabinet against a wall to push sides in place.
3Insert Cam Cap (A) in all Cam Holes.
3
����
A
����
