Nuvo NV-AP16OW Speaker Placement, Properly Mounting the Speakers, Tabletop Mount, Wall Mounting

AccentPLUS Outdoor Speaker Installation Guide

Congratulations on your purchase of the NuVo AccentPLUS1 and AccentPLUS2 Outdoor Speakers. A durable mineral filled, UV - resistant cabinet and powder-coated aluminum grill are able to withstand the elements and through careful design, are capable of superior audio reproduction. The secret is in a honeycomb pattern molded into the enclosure that provides important rigidity and also houses a special bituminous, acoustically inert material that eliminates unwanted resonance. Whether you are listening to the AccentPLUS1 or AccentPLUS2 models, the increased bass and treble response will heighten any listening experience.

Speaker Placement

Proper placement of the speakers is crucial to enjoying the benefits of the AccentPLUS Outdoor Speakers. Consider the optimal listening area. The speakers should ideally be placed facing that area with 8 - 10 feet of separation or if you are using the stereo speakers try to center it within the space. The on-wall bracket provided with the speakers allows them to be angled ideally at the ear level of the listener.

Properly Mounting the Speakers

Fig. 1

Each speaker is shipped with two types of mounts. One is a tripod that allows each speaker to sit on a tabletop or shelf. The other is a U-shaped bracket that is designed for mounting the speakers on a wall.

Tabletop Mount

To use the included tabletop mount, locate the bottom of the speaker. This is the inset mounting screw with a small hole positioned next to it. This is designed to receive the small peg molded on the top of the tripod. The speaker and the tripod also have corresponding bevels that interlock. Line up the peg with the hole and the interlocking bevels on both the stand and

speaker and secure the stand to the speaker with the included Fig. 2 end cap, fig. 1. Once secured the speaker will stand upright on

any level surface.

Wall Mounting

A U-shaped bracket is shipped with each speaker designed for mounting the speaker horizontally on a wall. The beveled surfaces on the inside of the mount and on the exterior ends of the speaker allow the speaker to be tightened and angled appropriately toward the listening area. The end caps provided with the speakers tighten the bracket to the speaker enclosure to hold the speaker at the desired angle, fig. 2.

1