Mainboard nForce 680i SLI/

Mainboard nForce 680i LT SLI

Front Panel Headers: FRONTPNL

 

 

 

 

FRONTPNL

 

Pin

Assignment

Function

Pin

Assignment

Function

1

HD_PWR (+)

Hard Disk LED

2

HDR_BLNK_GRN

Front Panel Light

3

HAD#

(HD_LED)

4

HDR_BLNK_YEL

(PWRLED)

5

GND

Reset Switch

6

SWITCH_ON#

Power Switch

7

FP_RESET#

(RESET)

8

GND

(PWRSW)

9

N/C

 

10

Key

 

Hard Disk LED Header (Orange): HD_LED

If your case front panel has a hard drive LED cable, attach it to this header. The LED will flicker when there is hard disk drive activity.

Reset Switch Header (Blue): RESET

This header can be attached to a momentary SPST switch (reset button) cable on your case front panel. The switch is normally left open. When the switch closed, it will cause the mainboard to reset and run the POST (Power-On Self Test).

Power LED Header (Green): PWRLED

These mainboards provide a 2-pin power LED header. If there is a 2-pin power LED cord on your case front panel, you can attach it to the 2-pin power LED header. Then the power LED will illuminate while the system is powered on.

Power Switch Header (Red): PWRSW

This header can be attached to a power switch cable on your case front panel. You can turn your system on or off by pressing the button attached to this power switch cable.

14