Owner's Guide
In the event that any component of your regulator assembly requires any form of repair or service, return it to your local Authorized Oceanic Dealer for professional service by a trained technician authorized to perform Oceanic factory authorized service.
Once each year your complete regulator assembly should be inspected and serviced by an Authorized Oceanic Dealer. More frequent service is recommended if you dive in severe conditions or more frequently than an average diver (see guidelines on page 18).
Annual Service consists of:
•Inspection
•Complete disassembly
•Thorough cleaning and evaluation of reusable parts
•Replacement of
•Complete reassembly
•Final adjustment and testing
Costs for routine inspection and Annual Service are understood to be a normal part of operation, and are not covered by the regulator's limited warranty.
If Warranty Service is requested, or routine service parts are requested in accordance with a Registered Service Agreement, present the appropriate documents (i.e., card, receipts, and service records) to the Authorized Oceanic Dealer when the regulator is delivered for service.
ADDITIONAL SPECIFICATIONSFOR CONNECTING COMPONENTS TOOCEANIC REGULATOR FIRST STAGESSecond Stage (Primary or Octopus):•Nominal Source Pressure = 140 psi (9.5 BAR) ± 5 psi (.5 BAR)
•Maximum Source Pressure = 155 psi (11 BAR)
•Thread Size = 3/8 - 24 UNF
•Inhalation Effort = 1.1 to 1.3 ciw* (cubic inches of water) * Delta 3 model = adjustable from 0.0 to 2.5 ciw
•Exhalation Effort = 1.1 ciw*
* Omega II and Zeta models = 1.1 to 1.3 ciw
•Flow Rate = 30+ scfm (standard cubic feet per minute)
•Work of Breathing is equal to or better than USNavy and CEN
Pressure Gauge or Pressure Transmitter:•Maximum Source Pressure = 5000 psi (350 BAR)
•Thread Size = 7/16 - 20 UNF
17