OEM Systems specifications Pull-offalignment tool BB-11, BB-12, BB-21, BB-22, Box Buddy

Box Buddy

Low Voltage Mounting Rings

Pull-off alignment tool

BB-11

Add 1 Low Voltage device to a 1 gang 110 VAC Box

BB-12

Add 2 Low Voltage devices to a 1 gang 110 VAC Box

BB-21

Add 1 Low Voltage device to a 2 gang 110 VAC Box

BB-22

Add 2 Low Voltage devices to a 2 gang 110 VAC Box

OEM Systems Company, Inc.

740 Freeport Blvd., #106 Sparks, NV 89431-6168

775 355-0405 Fax 775 355-0646

www.oemsystems.com info@oemsystems.com

Box Buddy low voltage mounting rings are designed for positioning low voltage devices next to 110 VAC electrical boxes with stan- dard NEC spacing so that the combined 110 and low voltage device(s) may be covered with one multi-gang coverplate for an elegant appearance. The Box Buddy uses a patent pending pull-off alignment tool that makes combined installation and alignment of 110 VAC and low voltage devices simple and quick.

Box Buddy low voltage mounting rings feature conduit flanges off-set by 5/8" which enable un-obtrusive use of conduit connec- tors (see photo bottom of page on reverse).

110 Box

110 box and Box Buddy with

alignment tool in place

Product materials & specifications are subject to change / improvement