43 - C130n User’s Guide
Interface Menu
Note All factory default values are shown in bold.
ETHERNET
TCP/IP ENABLE Settings YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IPV4 DHCP/
BOOTP
Settings YES/NO
Select whether or not the IP address
is automatically acquired.
If YES is selected, the IP address is
automatically acquired.
If NO is selected, the IP address is
not automatically acquired.
IPV4
ADDRESS Settings 192.168.001.002
Set the IPv4 address for this printer
on the network.
Use the , , , and keys to
specify the value.
If the IP address is manually
specified, DHCP/BOOTP is
automatically set to NO.
DEFAULT
ROUTER Settings 000.000.000.000
Specify the IPv4 address of the router
if one is on the network. Use the ,
, , and keys to specify the
value.
SUBNET
MASK Settings 000.000.000.000
Specify the subnet mask for the
network.
Use the , , , and keys to
specify the value.