Setting Up the Printer
Follow the instructions in this chapter to quickly set up the OKIPOS 80 Plus III Printer. We recommend that you check it out first before you connect it to your system to make sure everything is working properly. You should have it ready to hook up to your system in just a few minutes.
Here is a list of what is covered in this chapter:
•Unpacking the printer
•Choosing a location for the printer
•Connecting the power cord
•Loading paper
•Testing the printer
•Connecting the communication and cash drawer cables
Unpacking the Printer
Be sure to save the box and packing materials in case you need to send the printer to be serviced.
1.Before removing the printer, examine the outside of the box for signs of damage.
If any damage has occurred to the box, carefully examine the printer and accessories before setting up the printer. Report all evidence of damage or abuse to the dealer and shipper.
2.Open the box and remove all the papers and supplies envelope.
3.Carefully lift the printer (inside the packing material) out of the box and set it on a sturdy, flat surface.
4.Separate the printer from the packing material.
Simply reverse these steps if you need to repack the printer to send in for service (you do not need to repack the supplies).
5.Check the printer for any signs of damage.
If the printer or any parts are damaged, report this to the dealer or shipper immediately.
8 | OKIPOS 80 Plus III |
80p3gb.p65 | 8 | 12/01/99, 11:43 |
