Oki 8480FB - page 20

Microline 8480FB User’s Guide
Loading Print Media • 20
2. Lift the lock lever on the left tractor, then move the left tractor to set the
desired left margin for printing.
•The ▼ mark on the gauge (1)—or the center of the diamond
shaped hole (2)—represents the location of the center of the
first character printed.
• For printing forms, move the left tractor to the right as far as
it will g o (the mov ement of the left t ractor is limited t o ensure
that the paper covers the paper out sensor).
3. Push the lock lever down to lock the left tractor in place.
4. Lift the lock lever (1) on the right tractor (2) and move the tractor over
to correspond to the width of the continuous forms you are using.
Center the paper support (3) between the two tractors.
F5-04a.JPG
8480_2_crop.JPG
F5-05a.JPG