Getting started > 22
Loading PaperCassette Trays
1. Remove the paper tray from the unit.
2. Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that all
sheets are properly separated, then tap the edges of the stack on a flat surface to
make it flush again (3).
3. Load paper long edge feed (LEF) (for letterhead paper load face down with top edge
towards the right of the unit) (1) up to mark (a).
4. Adjust the rear stopper and paper guides (2) to the size of paper being used.
NOTE
For A6 paper, remove the paper guides and re-install in the A6 position.
1
2
3
1
a
2
3