49
The Label Dispensing mode You can choose to dispense labels in Continuous Mode and
Dispense Mode. In either mode, test printing and online
printing are available.
Configuring Dispense mode
Dispense Mode can be set to Auto Print or Manual Print, as
described below.
To switch between Auto or Manual Print for the Dispense
Mode, set the DIP switches and then hold down the PRINT or
FEED button when turning the printer ON. The new settings
take effect when the printer is next turned ON.
Switching from Manual to Auto Print
1. Turn the printer off.
2. Make sure DIP switches 1-2-3-4 are set to
OFF-OFF-OFF-ON.
3. Open the cover.
4. Press and hold the PRINT button while turning the printer
on.
5. Close the cover.
Switching from Auto to Manual Print
1. Turn the printer off.
2. Make sure DIP switches 1-2-3-4 are set to
OFF-OFF-OFF-ON.
3. Open the cover.
Type Description
Auto Print Prints one label after receiving data and waits for
peeling. After the label is peeled off, the printer
automatically prints the next label.
Manual
Print
Prints one label after receiving data and goes off-line.
Press the PRINT key to print the next label. After the
specified number of labels are printed, printing
terminates. No printing occurs even when the PRINT
key is pressed.