50
4. Press and hold the FEED button while turning the printer
on.
5. Close the cover.
When setting the dispense mode, the STATUS LED blinks
green, and turns into a steady green signal upon completion
of setting. Turn off the printer ONLY when the STATUS LED is
a steady green light.
Status LEDs for Printing Modes
Available modes include Normal, Test Print, Head Check
Setting and Online Command Setting mode.

Status LEDs for Normal Mode

Note: The Battery indicator (only available on the Bluetooth/
WLAN model) remains lit even when the printer is
OFFLINE. During the Standby state, the printer
resumes normal operational status upon sensing any
incoming data or pressing of the buttons.

Status LEDs for the Test Print Mode

Enter Test Print mode by using the FEED and POWER buttons.
Operational State STATUS LED LED Action
START OF PRINTING Orange Steady
ONLINE Green Steady
OFFLINE OFF NA
STANDBY (after 5
seconds of inactivity)
Green Blinks every 4
seconds
Operational State STATUS LED LED Action
ENTERING TEST
PRINT MODE
Orange Steady
START OF TEST
PRINT
Green Blinks
DURING TEST PRINT Green Steady
END OF TEST PRINT OFF NA