Microline 1120 User’s Guide
10
Print Modes

Change Print Mode

You can change print modes directly from the front panel. Hold down the SEL
button and press the button indicated below. The printer will cycle through
the choices as indicated by the two STATUS lights. When you release the
buttons the selection is set.
Nota During normal operation, the status lights show the font selection.
panel.jpg
Button
combination Printing style
STATUS Light
combination
Left Right
SEL + LF/FF Font
Near Letter Quality On
Utility On
High Speed Draft Flashing
Super Speed Draft Flashing
SEL + LOAD/EJECT Character pitch
10 CPI On
12 CPI On
15 CPI Flashing
17 CPI Flashing
20 CPI On On
Proportional Flashing Flashing
SEL + TEAR Print Speed
Normal On
High Speed On
Quiet On On