Oki ML1120 Menus

Microline 1120 User’s Guide

11

Menus

The printer has an internal menu containing a number of default parameters

which can be set to enable your printer to match the parameters required by

your computer.

Entering the Menu Mode

To enter the Menu Mode, press SEL while turning on the printer.

Changing Menu Settings

1. Press SEL while turning on the printer.

2. Change settings:

a. Press SEL to select the relevant group that needs to be changed

(the group is the left-hand column on the Menu printout).

b. Press LF/FF to select the relevant item within the selected group

(the Item is the center column on the Menu printout).

c. Press LOAD/EJECT to cycle through the settings available for the

item you want to change (the settings are the right-hand column

on the Menu printout).

d. To continue making changes:

• press SEL for the next group

or

• press LF/FF for the next item.

3. Repeat the previous step until you are finished changing settings.

4. Hold down TEAR, then LOAD/EJECT, then LF/FF together to save the

changes you have made and exit the Menu Mode.

Important

Exiting the Menu Mode by turning off the printer will cancel any

changes you have made.

Contents

Main Copyright Information Document Information ___________________ Disclaimer_____________________________ Trademark Information __________________ Contents Page Parts of the Printer Front View Page Page Control Panel Buttons Lights Print Modes Change Print Mode Menus Entering the Menu Mode Changing Menu Settings Important Groups, Items, and Settings List of Menu Groups Printer Control Font * Selects double width and double height characters. Symbol Sets Rear Feed Page Bottom Feed Top Feed Page Microline 1120 Users Guide Set-Up Nota The default setting is in bold blue italic type. Page Parallel I/F Serial I/F Loading Paper Loading Single Sheets Page Loading Continuous Forms, Rear Feed Page Loading Continuous Forms, Bottom Feed Step 1: Move the Tractor Assembly Page Page Page Page Page Page Page Step 2: Load Paper Page Set Top of Form (TOF) General Information Use the Printer Menu panel.jpg CUT SHEET TOP OF FORM Temporary TOF Use the Control Panel Form Tear Off Turn On Forms Tear Off PRINTER CONTROL Move Continuous Forms Up for Tear Off Printhead Gap Adjusting the Head Gap Lever Positions: by Paper Type Lever Positions: by Paper Thickness CAUTION! Troubleshooting Paper Jams, Individual Sheets Paper Jams, Continuous Forms Page Specifications Reliability Print Media Specifications Single Sheets Print Media Specifications (cont.) Individual Multi-Part Forms Print Media Specifications (cont.) Continuous Single-Part Forms Continuous Multi-Part Forms Envelopes Printer Dimensions Printer Weight Environmental Requirements Electrical Requirements Voltage Utilities Overview Accessing Descriptions of Utilities OKI DIPUS (Dot Impact Printer Utilities) Page OKI DIPUS (Dot Impact Printer Utilities)