Manuals / Oki / Computer Equipment / Printer

Oki ML 3390 Turn the printer off, Use the platen knob to back the jammed paper out, ML3390/91

Models: ML 3390 3391

1 35

Download 35 pages 50.52 Kb

Page 12

Image 12

Single-Sheet Jams

1.Turn the printer off.

2.Use the platen knob to back the jammed paper out.

3.Open the access cover and remove the pull-up roller assembly.

4.Remove any torn pieces from around the carriage.

5.Reinstall the pull-up roller assembly, and close the access cover.

6. Turn the printer on, and reload paper.

ML3390/91

Page 12

Image 12

Oki ML 3390 Turn the printer off, Use the platen knob to back the jammed paper out, Turn the printer on, and reload paper

Contents

English ALARMML 3390/3391 Help Guide1995 by Oki. All rights reserved First edition January Safety EnglishThe power cable or plug is frayed or damaged Contents EnglishSelecting the Print Quality and Font Entering and Exiting the Menu ModeML3320/21 Maintenance Note For the best results, use genuine Oki ribbonsCaution! The printhead may be HOT EnglishClearing Paper Jams 5. Install the new ribbon cartridge2. Open the access cover, and remove the pull-up roller assembly Rear-Feed Jams4. Replace the pull-up roller assembly, and close the access cover English3. Remove any torn pieces of paper 6. Turn the printer onPage 7. Replace the pull-up roller assembly, and close the access cover English8. Turn the printer on 9. Press FF/LOAD Help Guide3. Open the access cover and remove the pull-up roller assembly 5. Reinstall the pull-up roller assembly, and close the access cover1. Turn the printer off 2. Use the platen knob to back the jammed paper outEnglish 1. Turn the printer off, and remove any paper from the pathTroubleshooting Problem The printer does not print when data is sentProblem The ALARM light is on and the Character Pitch Problem My word processor files dont print the wayProblem The ALARM light is blinking 15 light is flashingProblem Continuous-form paper is sticking to the paper separator Problem Ink smears on paperUsingYour Printer Print Mode Indicator LightsEnglish paper lever is set to wrong position if 10 cpi light is also blinking➊ ➋ ➌ Print Mode Control Panel KeysEnglish LQ Letter QualityUTILITY Swiss Bold LQ light on10 cpi 12 cpi15 cpi 17.1 cpi, 20 cpiPRINT QUALITY EnglishSummary of Menu Settings SettingGroup Settings EnglishGroup 13.6Settings Group17.1 cpi, 15 cpi Invalid, ValidExplanations of Menu Items EnglishPage Width ML 3391 only. Change to 8 to print on Important! Never engage Forms Tear-Off when printing on labels English➊ ➋ ➌ ➍ This feature is normally turned off. To activate itSpecifications SettingResolution EnglishPrint Modes ModeCharacter Pitch Resident FontsPaper Weight Paper SpecificationsWeight EnglishPaper Specifications continued WeightDimensions W x D x H WeightIndex Englishsetting Tear featureTear-off feature Oki Systems Company EnglishOki Systems UK Limited Help Guide