Oki 3391, ML 3390 manual Important! Never engage Forms Tear-Off when printing on labels, English

Skip Over Perforation. Change toYes if you want the printer to go to the next page when it comes within 1" (25 mm) of the bottom of the page. Keep it set to No if your software has its own page formatting controls.

Slashed Letter O. If set toYes, capital and lower case slashed O (Ø and ø) will appear at locations 9Bh and 9Dh respectively in USA code page. If set to No, the characters “¢” and “¥” will appear at these locations.

Style. Change to italics if you want the printed characters to be slanted.

Time Out Print. If your software spends a long time processing between portions of data it feeds to the printer, change the setting to Invalid to keep your printer from inadvertently dumping the received data while it is waiting for more.

Wait Time. Sets the amount of time the printer will wait for more data before moving to the form tear-off position.

Zero Character. If you do not want the printer to use a slash to distinguish the number zero from the capital letter O, change the setting to Unslashed.

Tear Feature								➊	English
Using the Printer's Features
	SEL
			LF	FF/LOAD	TEAR	PARK QUIET
	SEL
	MENU	SHIFT	Micro Feed	Micro Feed			TOF
			Down	Up
	EXIT		GROUP	ITEM	SET	PRINT
	POWER	ALARM		MENU

Use this feature to advance continuous-form paper up to the tear position by simply pressing TEAR (➊).

Note: The Tear Feature can not be used when the optional pull tractor is engaged.

Forms Tear-Off Feature

Important! Never engage Forms Tear-Off when printing on labels!

The Forms Tear-Off feature automatically moves continuous-form paper up to the tear position after the interval you select, then moves it back down again for printing when the printer receives more data.

Help Guide 21