Olevia 242T FHD manual Connecting to a DVD Player with Component Cables

English

TV Installation and Connection Guide

Connecting to a DVD Player with Component Cables

Disconnect all power sources before making any connections.

Use this method of connection if your DVD Player has component (Y, Pb, Pr) jacks.

1.Using a component video cable, connect the DVD Player's Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.

Colors on Component Video connectors:

Y:Green

Pb (also identified as Cb, CB or B-Y): Blue

Pr (also identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your DVD player are sometimes labeled as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the matching colors.

2.Using an Audio cable, connect the DVD player's Audio OUT jacks to the TV's Audio in jacks.

For 242 / 247 / 252 / 255 TFHD Models

Rear of TV

Red

Audio cable

	White
	Red
Component cable
with RCA connector	Blue
	Green

DVD Player

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (Composite) and S-Video connection.

Note: YPbPr is set at default to best perform with FHD 1080p content, set Input to "Interlace DVD" for best performance with regular 480i and 480p content.

(Menu - Picture - Mode - Input = "Interlace DVD")

17