Getting Started

4Identification of Parts

Built-in Microphone

Earphone jack

Microphone jack

 

 

Display (LCD panel)

 

Record/play indicator light

Hold switch

REC (Record) button

STOP button

 

USB terminal*

+ button

PLAY button

9(Fast Forward) button

0(Rewind) button

– button

 

FOLDER/INDEX button

DISPLAY/MENU button

Battery cover

ERASE button

 

*PC (USB) terminal....

VN-1100PC/VN-2100PC/VN-3100PC/VN-4100PC

4Inserting Batteries

Built-in speaker

1

Lightly press down on the
arrow and slide the battery

 

cover open.

2

Insert two size-AAA alkaline
batteries, observing the correct

 

polarity.

3

Close the battery cover
completely.

Time/Date screen appears. The hour indicator flashes, indicating the start of the Time/Date setup process. (See “Setting

Time/Date (TIME)” for details)

An optional Ni-MH Rechargeable Battery (BR401) from Olympus can be used for the recorder.

Replacing Batteries

When appears on the display, replace the batteries as soon as possible. Size-AAA alkaline

batteries are recommended. When the batteries are depleted, appears on the display, and the recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace batteries to maintain the current settings (Time/Date, etc.). For your convenience,the recorder also logs the current settings in nonvolatile memory at hourly intervals.

4Power Supply

The HOLD switch functions as a power button. When you do not use the recorder, set the HOLD switch to the HOLD position while the recorder is stopped. This will power off the recorder and minimize the battery drain.

Power on…Reset the HOLD switch.

Power off…Set the HOLD switch to the HOLD position.

Standby Mode and Display Shut Off

HOLD

If the recorder is stopped or paused for 60 minutes or longer during recording or play back, it goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode and turn on the display, press any button.

- 2 -