Recording
1 | Press the FOLDER button to |
select the desired folder |
Press the REC button to start
2 recording.
The Record/play indicator light turns red, and recording starts.
To stop recording, press the
3 STOP button.
New recordings are saved as the last file in the folder.
a
b
c
d
e
aCurrent folder
bCurrent recording mode
cCurrent file number d Recording time e Remaining recording
time
4To Pause Recording
To Pause
Press the REC button during recording.
➥“PAUSE” appears on the display and the record/play indicator light flashes.
To Resume Recording
Press the REC button again.
➥Recording will resume at the point of interruption.
4Recording from External Microphone or Other Devices
The external microphone and other devices can be connected and the sound can be recorded.
sWhen the external microphone is connected to the microphone jack of the recorder, the
sWhen using an external microphone, choose adequate microphone, such as a
sWhen connecting an external equipment, use the connecting cord KA333 (optional).
Notes
A audio input terminal of other devices
sIf “FULL” appears on the display, you cannot record in the selected folder. In such a case, erase unnecessary files or download to PC
sIf the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations.
Put a notebook or other item between the table and the recorder so that the vibration is not easily transmitted for clearer recording.
sEven if you press the DISPLAY button, the display will not change to current recording time if the remaining recording time is 5 minutes or less.
sWhen remaining recording time falls to 1 minute or less, the Record/play indicator light flashes red. sThe recorder will enter Stop mode if it has been left paused for 60 minutes or longer.
sIn case of difficult acoustic conditions or low speaker’s voice, recording in XHQ or HQ is recommended. Also, usage of an external microphone (sold separately) could improve the quality of recordings.
sThe input level cannot be adjusted on this recorder. When you connect the recorder to an external device, execute a test recording and adjust the output level of the external device.
4LCD Display Information
You can select an option for the display of the recorder. This help review and confirm different recorder settings and file information.
State of the | Operation | Display |
recorder |
|
|
|
|
|
While in stop | Press and hold | The total number of files recorded in the folder and |
mode | the STOP button | remaining recording time appears on the display. |
|
|
|
While in | Press the | The display switches between current recording time and |
record mode | DISPLAY button | remaining recording time. |
|
|
|
While in stop | Press the | Playing time → Remaining playing time → Recording date |
mode or | DISPLAY button | of the file → Recording time of the file → Playing time . . . |
playback mode |
|
|
|
|
|
- 4 -