Customized Alarm Playback

Setting the alarm

Select the message you want to use as an alarm playback by pressing the

button so

that the message No. is displayed on the LCD (see page 12).

Press and hold the FOLDER/MENU button for more than 1 second to enter the Options mode (see page 22).

In the Options mode, select the [ALARM] setting and press the

button to switch the alarm [ON]. (Press the FOLDER/MENU button.) The LCD shows

The "hour" and "minute" will start to blink. Set the desired alarm time by

pressing the

/or

buttons

 

(see page 23).

 

Press the FOLDER/MENU button to continue through the other options, or hit the STOP button to exit the Options mode.

Alarm playback

At the specified alarm time, the recorder emits short electronic beep tones.

Press any button while the beep tones are being emitted to playback the message set for that time.

Press the STOP button to stop alarm playback.

The electronic beep tones stop automatically if no button is pressed for 5 minutes after the beeping starts. The message is not played back in this case.