Press the STOP button to stop recording.

When available recording time falls below 1 minute, the red LED indicator starts blinking.

Additional recording is not possible when [FULL] is shown on the LCD. To continue recording, first erase unnecessary messages (see page 13)

Recording-Pause(REC PAUSE)

Press the REC button once during recording to enter recording-pause mode.

During recording-pause, is shown on the LCD and the red LED

indicator goes out.

The Stop mode is automatically engaged if the recorder is left in the recording-pause mode for 30 minutes or the STOP button is pressed during recording-pause mode.

Press the REC button again to resume recording. Using the recording-pause mode allows you to continue recording in the same message.

8