Olympus DS-150 operation manual Alarms, Menu Operation, Vcva

T572InstDS-150-E.Q33J1999/4/260:57PM y [ W 28

ALARMS

This recorder is preset to automatically generate the following alarms. You can cancel any alarm with a simple setting operation.

1.Record end alarm

Sound: Beep, long beep,...beep, long beep....

Condition: Sounds when the recorder runs out of remaining memory during recording.

2.Record pre-end alarm

Sound: Long beep every 15 seconds.

Condition: Sounds when the remaining memory drops below 90 seconds during recording.

3.Message end alarm Sound: Low-pitched beep.

Condition: Sounds when the end or beginning of a message is reached.

4.Operation alarm Sound: Beep

Condition: Sounds when the press of the REC button is accepted.

XWhen the earphone is plugged in, the built-in speaker does not generate alarms.

MENU OPERATION

When the MENU switch is pressed (for less than 2 seconds), the LCD panel displays the first menu. (In the first menu the LCD panel initially displays [R-TIME] and [SP] or [LP] as described in "1. Recording mode".) Using the Up/Down control on the MENU switch allows you to change the settings of "2 Microphone Sensitivity", "3. VCVA setting", "4. Insert recording mode", "5. Partial erasure", "6. Moving messages between folders" and "7. ERASE ALL" as described below. When the MENU switch is kept pressed (for more than 2 seconds), the LCD panel displays the second menu. (In the second menu the LCD panel initially displays "1. Alarm setting (ON/OFF)".) Adjusting the Up/Down control and pushing the MENU switch allows you to change the settings of "2. Time/date setting", "3. ID number setting" and "4. Formatting" as described below.

First menu

Stop mode *Flow in Down direction

More than 2 seconds

R-TIME	M-SENS	VCVA	R-MODE	ERASE	MOVE	ERASE
						ALL
Stop mode	*Flow in Up direction

More than 2 seconds

(Alarm setting change procedure)

1In the Stop mode, press and hold the MENU switch for more than 2 seconds to display the alarm setting menu ([ALARM] and [ON] or [OFF]) appears on the LCD panel.

2Pressing the MENU switch within 4 seconds allows you to switch the alarm setting between[ON] and [OFF]. The selected alarm setting is set when the STOP button is pressed or when no opera- tion is performed for 4 seconds while the desired alarm setting is displayed.

	R-TIME	ERASE	MOVE
		ALL
Second menu
	Stop mode	*Flow in Down direction
More than
2 seconds

ERASE

R-MODE VCVA M-SENS

*When the STOP button is pressed either in the first or second menu, the recorder will return to the Stop mode.

ALARM	FORMAT	I D	Time/date
Stop mode	*Flow in Up direction

More than 2 seconds

ALARM Time/date I D FORMAT

Menu switch operation

Down direction operation Up direction operation

Push operation

28 29